Topic: disco bobtails (Read 8461 times)

mentalmoshio sophs V8i · « **on:** October 28, 2007, 19:00:26 »

disco bobtail look better with every one done dont you think

burgerman · « **Reply #1 on:** October 28, 2007, 19:25:56 »

yes i like the look of them very much if well done, which it look as if the second one in your post does

Jake · « **Reply #2 on:** October 28, 2007, 19:36:52 »

I still dont like the Bobbed Disco compared to the RR Bob tail.
The roof line never looks right to me :roll:
I did contemplate cutting mine but i couldn't come up with a sutable rear end look in my mind.
:)

corrosiverob · « **Reply #3 on:** October 28, 2007, 19:50:36 »

Got to be the disco, liked the rangie but like the disco more.

Disco-andy · « **Reply #4 on:** October 28, 2007, 19:59:04 »

i think a well done bob disco look fantastic , but there are so many poor one around the sights. i have seen one to day done with a bit if old ply as the back! I what to do mine some time but dont what to lose too much, i realy like that second yellow one

davidlandy · « **Reply #5 on:** October 28, 2007, 20:01:15 »

Not to my own taste, I think they look odd, a pick up version would be more my cuppa tea.

Has anyone done one like that?

denviks · « **Reply #6 on:** October 28, 2007, 20:04:13 »

i did think of doing that to my 200tdi disco but i just know that i couldnt do it justice. it would be a waiste of a very good truck......

i do like the look of a well done one though 8) 8) 8)

daveyravey · « **Reply #7 on:** October 28, 2007, 20:11:46 »

One of the mags did an article on an Aussie extended td5 "ute" a while back.
Was very well done.

Staffy · « **Reply #8 on:** October 28, 2007, 20:11:56 »

Definately the Disco over the rrc.

corrosiverob that silver one is definately one of the better looking ones.

@corrosiverob: what are the bumpers you have one there?

Cheers
Phil

corrosiverob · « **Reply #9 on:** October 28, 2007, 20:32:14 »

standard rear and home made front.

mentalmoshio sophs V8i · « **Reply #10 on:** October 28, 2007, 21:47:14 »

course you want rollcage, 35/12.5/16 and 5 inches of lift too

Staffy · « **Reply #11 on:** October 28, 2007, 21:49:35 »

Quote

standard rear and home made front.

They look well, good work. Winches mounted underneath then?

Cheers
Phil

extreme90 · « **Reply #12 on:** October 28, 2007, 22:06:52 »

here ya go dave, heres a bob/pickup challenge disco of my very close friend jim's, which im currently helping him to build
its still work in progress, but is near finished 8)
steve, i will be less than impressed if these pictures get copied !!

daveyravey · « **Reply #13 on:** October 28, 2007, 23:03:48 »

Quote from: "Traybackdan"

here ya go dave, heres a bob/pickup challenge disco of my very close friend jim's, which im currently helping him to build
its still work in progress, but is near finished 8)
steve, i will be less than impressed if these pictures get copied !!

:lol: :lol: :lol:

extreme90 · « **Reply #14 on:** October 28, 2007, 23:13:40 »

if your laughing at what i think you are, then i do mean it :shock: and will not be chuffed

dan

daveyravey · « **Reply #15 on:** October 28, 2007, 23:29:54 »

Nah, just laughing at your humour tbd :D

Just had a peek at Rob's public album.
That's one tidy disco :D

mentalmoshio sophs V8i · « **Reply #16 on:** October 29, 2007, 07:02:34 »

which company is it what has done a series 2 disco pick up?

burgerman · « **Reply #17 on:** October 29, 2007, 13:13:00 »

cant remember the company"s name at the moment but they were selling/displaying panels for a bobtail diso at sodburys this year, not an expert on these things but looked quite good to me

banzai67 · « **Reply #18 on:** October 29, 2007, 23:38:30 »

That would be longranger, was very nice for not a masive budget.

mentalmoshio sophs V8i · « **Reply #19 on:** October 30, 2007, 15:20:37 »

Quote from: "banzai67"

That would be longranger, was very nice for not a masive budget.

dont think it is all the bodywork is disco

muddyjames · « **Reply #20 on:** October 30, 2007, 17:05:07 »

I'm not a fan of the bob tail Disco.

I want to go the opposite way with mine one day and make it a 6x6 disco.

boss · « **Reply #21 on:** October 30, 2007, 18:53:23 »

Quote from: "davidlandy"

Not to my own taste, I think they look odd, a pick up version would be more my cuppa tea.

Has anyone done one like that?

im in the prosess

have got a forum post on the build if you want to know more.

Little-Green-Machine · « **Reply #22 on:** October 30, 2007, 19:25:56 »

that looks awsome mate nice work :D

mentalmoshio sophs V8i · « **Reply #23 on:** October 30, 2007, 22:05:15 »

anybody got video of building one or anything like that really like to know how to.

90sam · « **Reply #24 on:** October 30, 2007, 22:37:06 »

now that is nice, kinda convincing me to get a disco now! How hard was it too build then?

extreme90 · « **Reply #25 on:** October 30, 2007, 22:45:53 »

Quote from: "steveo4v8i"

anybody got video of building one or anything like that really like to know how to.

in all honesty
from actualy doing one myself
it would make it that much longer to build
you'd end up with a vid 200 hours long :shock: :shock:
now you try edit that one down smaller, but still keep all the relivant bits

how mark does his series of a "a ....... is born " i dont no :shock:
dan

Range Rover Blues · « **Reply #26 on:** October 31, 2007, 00:35:04 »

Boss, are those X-Springs on the back?

mentalmoshio sophs V8i · « **Reply #27 on:** October 31, 2007, 06:18:55 »

i meant like a 4x4 is born type say 8 hours max be good for someone doing one rather than books.

layed out like this with but more technical stuff

http://www.youtube.com/watch?v=R9YuQq8e28Q

http://www.youtube.com/watch?v=uVitC1IdaVU

beatmasterdave · « **Reply #28 on:** October 31, 2007, 07:50:21 »

Quote from: "steveo4v8i"

course you want rollcage, 35/12.5/16 and 5 inches of lift too

reffering to your pic:
dont know how you're doing your photos mate. this is my attempt with photo bucket...

give it a try

boss · « **Reply #29 on:** October 31, 2007, 09:13:04 »

yes those are x-springs, ive got some on the front but cant get them on because the breaklines were too short.
90sam, i do have a post on this forum called disco truck build if you want to know more.

News:

AuthorTopic: disco bobtails (Read 8461 times)

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i

mentalmoshio sophs V8i