AuthorTopic: clanking sound under stress  (Read 1132 times)

0 Members and 1 Guest are viewing this topic.

Offline way2deep

  • Posts: 850
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« on: October 07, 2007, 22:13:15 »
my rangie that has a viscous type diff lock transfer box is starting to make a horrible clanking sound almost like teeth jumping sound when it's under heavy stress ...ie pulling away sometimes for a couple of seconds but a lot worse if attempting a hill climb ,,,,thing is ,,would it be the transfer box or front diff thats the problem...to be honest it does sound transfer box to front end area...if it is transfer box would it be complete box removal or can the insides be swapped in situ....
robbie
200 tdi rangie  1989  4dr

Offline Skibum346

  • Posts: 1975
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • T. A. N. S. T. A. A. F. L.
  • Referrals: 0
clanking sound under stress
« Reply #1 on: October 08, 2007, 00:22:30 »
Starting point for me would be to check all the bushes... then the UJ's on the props...

But if your certain it's coming from the Tx box it could be the chain or cogs inside are on their way out.

In which case, it's replace or rebuild I'm afraid.

Offline ChrisV8

  • Posts: 460
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« Reply #2 on: October 08, 2007, 12:35:37 »
:( Sounds like the viscous unit may be seized and forcing the chain over the sprockets ?

Jack one front wheel up and try and turn it, if you can't likely it's seized. Details of how to change it are on Ashcroft's site. But you could change to a normal LT230 for less cost ! See post above.
1982 Range Rover 200tdi inside
1993 LR 90 rebuild Project
2008 Jeep Patriot wondrous 45mpg VW diesel powered 4x4 road car

Offline way2deep

  • Posts: 850
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« Reply #3 on: October 08, 2007, 18:44:24 »
Quote from: ChrisV8
:( Sounds like the viscous unit may be seized and forcing the chain over the sprockets ?

yeah,it does make that sort of sound. :( i got a spare transfer box .looks like my job for the weekend is sorted then  :(

is it a complete t/box swap or can the insides be replaced in situ then
robbie
200 tdi rangie  1989  4dr

Offline ChrisV8

  • Posts: 460
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« Reply #4 on: October 08, 2007, 21:50:06 »
If it's just a seized viscous you can change that insitu without taking the box out, support the box and take the front prop off and the bit with the viscous unit off, 8 bolts I think, it has the gearbox mount attached. Unbolt the unit, new one in and replace.

Otherwise look at the links on the post above changing a BW is very similar.
1982 Range Rover 200tdi inside
1993 LR 90 rebuild Project
2008 Jeep Patriot wondrous 45mpg VW diesel powered 4x4 road car

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
clanking sound under stress
« Reply #5 on: October 09, 2007, 11:38:52 »
SOunds like the chain is jumping, it happens on badly worn units, apparently, never seen one.

The amount of damage it takes to cause this would suggest a replacement box though.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline way2deep

  • Posts: 850
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« Reply #6 on: October 30, 2007, 23:21:51 »
well changed the transfer box and it's a job well done ..all sorted now ..good call you chaps...thanks
robbie
200 tdi rangie  1989  4dr

Offline ChrisV8

  • Posts: 460
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« Reply #7 on: October 31, 2007, 14:14:27 »
:lol:  :lol: It's nice to hear that it was something others have diagnosed correctly, I have bought another Rangie with a bust transfer so have that to change as well now !!! That one has been driven till all drive went, just hoping it's the transfer that's gone and not the splines on the main box, fingers and toes crossed.
1982 Range Rover 200tdi inside
1993 LR 90 rebuild Project
2008 Jeep Patriot wondrous 45mpg VW diesel powered 4x4 road car

Offline way2deep

  • Posts: 850
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« Reply #8 on: November 04, 2007, 22:21:52 »
very true mate ,,,it's nice to know there's folk out there to point us in the right direction . :D
will strip t/ box down when i have time just to see what goes on in there :shock:  out of curiosity l0l..
robbie
200 tdi rangie  1989  4dr

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
clanking sound under stress
« Reply #9 on: November 06, 2007, 12:05:50 »
Take pictures :D
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline way2deep

  • Posts: 850
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
clanking sound under stress
« Reply #10 on: November 06, 2007, 18:20:22 »
ok will do  :lol:
robbie
200 tdi rangie  1989  4dr

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal