Vehicle & Technical > Discovery

Discovery Exhaurst !!!!

<< < (3/6) > >>

DEANO3528:
Yep I did this 18 months ago. It makes just a little difference to noise, mostly in the turbo whistle you can hear at the back. But I did mine because it kept getting crushed against the rear x-member.
I used a hole cutter then welded an old bend I had laying around. It works very well, for a freebie.

doris:
I knew I had seen it somewhere........

This guy does a kit for this mod, and there are photos of fitting it here....

http://www.gwynlewis4x4.co.uk/page10.html  

I don't know the guy, and have never used him, so no recommendation implied, but haven't heard or read anything negative about him either.

Hope it helps

Damon

Les Henson:
The rear 'silencer' is actually a resonator. Some people have said that the noise at higher revs is annoying. Normally people remove the centre silencer and leave the resonator in place, which makes a much better sound.


Les.

gtomo2:
Done it on my v8 used a lenght of flexi exhurst pipe as it was the easy way to do it so pics linked here. http://members.mud-club.com/profiles/gtomo2/gallery/080707

wizard:
Yep done mine a while back, bit noisy though.




Chopped of the back box and a bit of the pipe, added in a meter of flexy pipe and a couple of exhaust clamps.
Still got a bit of 53mm ID  flexyif someone needs it.

regards
wizard :twisted:

Navigation

[0] Message Index

[#] Next page

[*] Previous page