Vehicle & Technical > Discovery

Rear diff pinion seal

<< < (2/2)

Jimbo:

--- Quote from: "clbarclay" ---To get the nut undone on mine I used a replica of the land rover special tool made from scrap steel
--- End quote ---


This will be the tool that bolts across the prop flange to stop the diff from turning when you lean on the big bar to undo the big nut ?

Les Henson:
Replacing rear axle pinion oil seal:-

http://forums.lr4x4.com/index.php?showtopic=7903


Les.

clbarclay:

--- Quote from: "Jimbo" ---
--- Quote from: "clbarclay" ---To get the nut undone on mine I used a replica of the land rover special tool made from scrap steel
--- End quote ---


This will be the tool that bolts across the prop flange to stop the diff from turning when you lean on the big bar to undo the big nut ?
--- End quote ---



That will be the one. It makes it a lot easier I find than rellying on the halfshafts/wheels to resist the torque as they spring/twist too much. Not sure how long the LR one is, but I made mine long enough to rest on the ground whilst in use so I didn't have to hold it/resist the torque.

Navigation

[0] Message Index

[*] Previous page