AuthorTopic: relays  (Read 464 times)

0 Members and 1 Guest are viewing this topic.

Offline markthespark

  • Posts: 8
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
relays
« on: July 07, 2007, 17:38:32 »
does anybody have any idea where the wash wipe relay is on a 90
my wipers won't stop and i think its the washer relay that has jammed in the run on cycle after washer has stopped water
i know we have had a lot of rain but i would like to turn my wipers off now as it has stopped for the mo.
cheers

Offline spinkster

  • Posts: 76
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
relays
« Reply #1 on: July 07, 2007, 18:46:56 »
I'm sure I'll be corrected but isnt it behind the metal bit that the  fuse box cover screws to?
Its only kinky the first time

spinks

1988 110csw 200tdi retro fitted

Edge

  • Guest
relays
« Reply #2 on: July 07, 2007, 23:03:13 »
Check its not a fault at the stalk/switch end too.

Offline muddysteve

  • Posts: 931
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
relays
« Reply #3 on: July 07, 2007, 23:41:33 »
Quote from: "spinkster"
I'm sure I'll be corrected but isnt it behind the metal bit that the  fuse box cover screws to?


it is and its red, or at least it is on mine
Steve                www.lanerovers.co.uk    www.surreyoffroaders.co.uk

Offline Cassillis

  • Posts: 647
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: relays
« Reply #4 on: July 10, 2007, 14:33:42 »
Quote from: "elec69"
does anybody have any idea where the wash wipe relay is on a 90
my wipers won't stop and i think its the washer relay that has jammed in the run on cycle after washer has stopped water
i know we have had a lot of rain but i would like to turn my wipers off now as it has stopped for the mo.
cheers


Had this on mine. Changed everything until i realised it was the relay :roll:
It is in the fuse box you can't miss it it is the largest rectangular thing in there. IIRC about £20+ to replace. Try drying it out gently and replace it, then give it a good coat of silicone around the joint. Mine was due to water ingress through the join where the cap meets the body, causing it to short

HTH
Graeme
Avise~La~Fin

Offline markthespark

  • Posts: 8
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
relays
« Reply #5 on: July 11, 2007, 19:55:05 »
cheers will check it out this weekend  but i did manage to stop the wipers by disconnecting the yellow wire offov the wiper motor  although fast speed does not work now it means i can drive without the wipers wiping

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal