Vehicle & Technical > Range Rover
Advice for body lift
Mudlark:
--- Quote from: "barriesheene" ---Mudlark !
How are those Ultra High Molecular White polyethelene spacers coming ??? :wink: I need a set for the paj and rangie :lol: :lol:
--- End quote ---
See http://xpajunoffroad.com/os_commerce/index.php or I'm at Abingdon this weekend and I'll have some with me
buster uk:
I've fitted all the spacers.Took me and my dad a day to do them all.What a pain in the bot getting the old ones out.3 of them had completely seized.
Just on with doing the other jobs now.
So far then :
10 spacers fitted
Rad upper mounts re-positioned.
still to do :
Make longer tie bolts.
Sort out the fuel filler to fuel tank pipe.
Make 4 2" spacers to go on the rear floor supports.
Make brakets for rear bumper to bring it back up 2"
Modify the front winch bumper some how. :?
Grunter:
just returning to the off road scene after a year or so and looking to do this on my 98 Rangie, I have the benefit of having done this once before, some other things to check are the earth strap, if you look at the pics wolfie posted you can see the earth strap in the pic of the second spacer, on the last one i did this strap was connected to the body a short distance away from the mount and can be pulled off easily without noticing giving headaches later on, might not be an issue on all models but worth a look. also the flexi brake pipes, I found the Kit supplied extended hoses were still a little short so lowered the bracket holding the unions to suit, cheaper than getting another extended set the rear one often gets forgotten. An further essential mod if you dont have side steps or rock sliders is for three "NO STEP" stickers for the plastic sill strip!! :lol:
buster uk:
cheers grunter,i'll take a look for that earth strap.I don't remember seeing one.
Just raised the rear guardian bumper i have up so its back in line.
Need to check and lengthen the brake lines also ,forgot about them :oops:
barriesheene:
How's the lift coming along fella ???? Doing my pajero this weekend (2.5 ") Doing the wife's paj first cos it seem's alot more straight forward and it's already got the bigger tyre's :twisted: Hoping to do my rangie in the next couple of week's tho, ( it'll look on stilt's for a while tho cos it's got the original wheels/tyre's on :lol: )So how is yours coming along ??? Could you do it again now in a weekend ??? or is there just too much to change ? I'll need it straight back on road so I need to know everything that need's to be changed immediatly before hand. Not worried about seat belt mounting point's and bumpers etc cos there is only me using the car ! :roll:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version