AuthorTopic: body knock  (Read 5394 times)

0 Members and 1 Guest are viewing this topic.

jayboy

  • Guest
body knock
« on: December 14, 2004, 17:29:42 »
hi all got a body metal to metal type knock from near side front every time i pull away forward or reverse , ive just done the cv joint which has solved the clicking but cant find anything loose or worn looking, no play in the props nothing touching were it should not , any ideas? its a 95  300tdi 110 county cheers . :?

Offline davidlandy

  • Posts: 3568
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
body knock
« Reply #1 on: December 14, 2004, 18:14:02 »
checked the radius arm bushes, panhard rod bushes?
Dave
Sniff, sniff, this mud smells funny

jayboy

  • Guest
body knock
« Reply #2 on: December 15, 2004, 18:14:34 »
they move a little but ,well not sure how much it takes them to knock. getting worse each day it knocks now every time you slow down speed up and over bumpy ground . how much play can be acceptable ? many thanks for the info .

Offline davidlandy

  • Posts: 3568
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
body knock
« Reply #3 on: December 15, 2004, 19:04:07 »
i believe that there shouldnt be any noticable movement.
Dave
Sniff, sniff, this mud smells funny

Offline ibexman

  • Posts: 146
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
body knock
« Reply #4 on: December 15, 2004, 20:22:52 »
I had this issue -  horrible sounding metallicy noise from somewhere near the front wheel.  Got underneath with a large screwdriver and found some movement on the front radius arm bushes at the axle end.  Replaced them - noise gone.

However, I' ve just had a prod around again and there seems to be as much movement as before, but no noise!  Suppose thats LR mechanicals for you.

Regards

Dom
Foers Ibex 250
Land Rover Discovery SII

jayboy

  • Guest
body knock
« Reply #5 on: December 16, 2004, 17:06:49 »
many thanks all bush set on the way ! :D will let you know if it cures it or not .

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
body knock
« Reply #6 on: December 16, 2004, 18:08:49 »
Quote from: "ibexman"
I had this issue -  horrible sounding metallicy noise from somewhere near the front wheel.  Got underneath with a large screwdriver and found some movement on the front radius arm bushes at the axle end.  Replaced them - noise gone.

However, I' ve just had a prod around again and there seems to be as much movement as before, but no noise!  Suppose thats LR mechanicals for you.

Regards

Dom


If you prod these things you also have to pray  :wink:
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal