Topic: Where do you all keep your highlift jack? (Read 3376 times)

90sam · « **on:** June 09, 2007, 15:28:28 »

Bought a 48" hi-lift jack from land rover world show today and was wondering where about i could keep it. At the moment it's wedged behind the front seats but i would like somehwere better to store it! I was thinking maybe drill through the bulkhead, anyway how do you all store yours?

MuddyMachine · « **Reply #1 on:** June 09, 2007, 15:38:31 »

Usually here

90sam · « **Reply #2 on:** June 09, 2007, 15:41:41 »

So how is that held on, i presme somehow by the dog guard?

muck_truck · « **Reply #3 on:** June 09, 2007, 15:53:20 »

i have mine where the clips are on the left wheel arch in the picture posted by muddymachine. The seat over hangs it so its tucked away nicely.

frosty · « **Reply #4 on:** June 09, 2007, 16:07:59 »

in the garage normally, although that did prove to be a right pain in the ass when i got stuck miles from home! Im definatly tempted to at least put it in the truck next time i go out and play!

pux · « **Reply #5 on:** June 09, 2007, 16:44:55 »

mines like this 8)

MuddyMachine · « **Reply #6 on:** June 09, 2007, 17:34:02 »

Its just two bolt through the bulk head with wing nuts. Its not touching the dog guard.

90sam · « **Reply #7 on:** June 09, 2007, 18:01:18 »

Oh yer i see now! :oops:
Think i'll do it just as you have
Cheers muddymachine! :)

crazymac · « **Reply #8 on:** June 09, 2007, 22:32:35 »

Just found this

http://cgi.ebay.co.uk/landrover-series-high-lift-jack-fittings_W0QQitemZ140125182674QQihZ004QQcategoryZ31348QQrdZ1QQcmdZViewItem

tonycougar · « **Reply #9 on:** June 09, 2007, 22:55:00 »

I put mine inside just laid on the floor except when I go off roadin then it gets bolted (with a proper high lift kit) to the top of the roof at the rear. If I could find a pic of it I'd post one.

L90OOK · « **Reply #10 on:** June 10, 2007, 09:01:02 »

On my 90 I had a swing away spare wheel carrier with a highlift mout. On my 110 it's strapped to the roof rack.

Snooky · « **Reply #11 on:** June 10, 2007, 19:13:39 »

Mine is the same as Muddy but I used the hi-lift mounting kit

Kenny · « **Reply #12 on:** June 10, 2007, 19:44:29 »

I used to have mine mounted outside to the rear of the car. Not good for it so now inside on the rear of the bulkhead.

Bob696 · « **Reply #13 on:** June 10, 2007, 19:52:23 »

lengthways against the wheel arch in the back of the 90. Used a carrier from mill services. Had to cut a couple of inches so I could close the door though :-(

On the 110 it is bolted (and padlocked) to the roof tie down again using a jack carrier from mill services

thermidorthelobster · « **Reply #14 on:** June 10, 2007, 20:15:27 »

Disco not Defender, but I keep mine right here.

littlepow · « **Reply #15 on:** June 12, 2007, 13:44:57 »

I have one of these from North Off Road

http://www.northoffroad.co.uk

Cassillis · « **Reply #16 on:** June 12, 2007, 14:08:27 »

Mine goes here,
Scorpion swing away spare wheel carrier with integrated Hi-Lift platform

Litch · « **Reply #17 on:** June 13, 2007, 20:09:28 »

In the shed!

In 20-years ownership I have used it once for recovery yet plenty of times in the garden (very good for lifting tree stumps out of the ground).

the invisible dog · « **Reply #18 on:** June 13, 2007, 22:29:26 »

Mounted on the roofrack held in place with QuickFists

Freelander1980 · « **Reply #19 on:** June 21, 2007, 14:16:48 »

Mine is bolted across light bar at the front of the roof, will add pic later

Eeyore · « **Reply #20 on:** June 21, 2007, 16:37:08 »

Mines bolted down along the rear wheel box. Same place in the racer too. It's indoors, so it's away from the elements and from the light-finger-fairies that seem to be too common these days!

Just a as quickie, does anyone esle realise the weight limit for the roof load on a Defender is about 75kg. Which, in theory, includes the roof rack as well. Makes you wonder!

Cheers
8)
Eeyore

Les Henson · « **Reply #21 on:** June 21, 2007, 18:40:56 »

I have mine mounted on a tray that's welded to the rear crossmember - a padlock goes through the two to stop some scrote from swiping it. The clamp on the bodywork came with the jack.

Les.

Mareng · « **Reply #22 on:** July 07, 2007, 17:20:46 »

I have mounted mine up on the roof rack, using mounts bought from the same company I got the jack from (I forget which one)

The height is ok for me, with 2" lift and my new mahoosive tyres, a person of smaller stature might struggle to get it down...

electricbluebadger · « **Reply #23 on:** July 07, 2007, 21:08:31 »

I have a triple gun rack mounted on my dog guard, it drops perfectly into one set of clips and is quick n easy to remove when needed .. will post pics later..

Cheers Steve

News:

AuthorTopic: Where do you all keep your highlift jack? (Read 3376 times)

pux

littlepow