Vehicle & Technical > Series Land Rovers

just plain help

<< < (3/3)

Lucy1978:
I've had a wire come off the starter solenoid relay before, that had the same effect.

screwy:
From recent bitter experience, I plump for solenoid too! :roll:  :)

Canada Al:

--- Quote ---b4 i started having trouble the ignition barrel would spin and one day i forgot myself and turned the key which in turn tore a wire "i think" from back of the barrel not a problem i thought as there was one empty slot on the barrel and i just crimped a new spade terminal on and stuck it onto the barrel in that empty slot.... does anyone know or have a diagram of the wiring of the back of a ignition barrel.... its on a 2a hoping all are the same but who knows lol
--- End quote ---


before you start with anything else , look at the last thing you did before you had the trouble . it sounds to me like you made a bad connection on the back of the switch which is causing a dead short and killing everything . you need to check with a multi-meter that you have made the right connection .

Navigation

[0] Message Index

[*] Previous page