Pages: [1]   Go Down

AuthorTopic: Stiffer suspension  (Read 739 times)

0 Members and 1 Guest are viewing this topic.

Offline _j_c_

  • Posts: 19
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Stiffer suspension
« on: April 15, 2007, 14:56:19 »
looking to stiffen my suspension on my 90.. currentally standard suspension but use my 90 to tow a heavy horse trailer off road, across fields etc... find that I bottom the suspension on a regular basis...

anyone got any recomendations?
Logged
JC

Offline I dream of 60mph

  • Posts: 9
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Stiffer suspension
« Reply #1 on: April 15, 2007, 15:31:04 »
I replaced all the springs on my N/A Ex mil 90 with the same military spec ones,  harder ride compared to standard Civvy ones and carried the weight.

Part No's.

Drivers side Rear NRC 9448 (BLUE & RED)
                          NRC 9462 (GREEN YELLOW & RED) Heavy Duty

Passenger Rear   NRC 9449 (YELLOW & WHITE)
                          NRC 9463 (GREEN YELLOW & WHITE) Heavy Duty

Drivers side FRONT NRC 9446 (BLUE & GREEN) 2.5 NAD
           
Passenger FRONT   NRC 9447  (BLUE & YELLOW) 2.5 NAD

These are straight from a Army parts list so may have been superseeded knowing Landrover but at least it gives you a starting point, hope it helps.

Also found this which might help, I cant open it at work but should be spring rates http://www.ep90.com/assets/docs/SpringRateInfo.zip
Logged
Mick
'94 Discovery ES
'66 2a Doublecab

Offline biggerlandy

  • Posts: 482
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
sus
« Reply #2 on: April 15, 2007, 16:12:12 »
fit ome
Logged
just get muddy
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal