Vehicle & Technical > Discovery
HUB TOOL
needbeer:
its just the cheapie hub wrench
muddymart:
i went halfords as i was passing for some wd40, was £2 dearer than my local diy shop, that could be me been tight but come on !!
The one near us didnt have a lot of gear in it, just boy racer's extras and a few tool boxes, think it was closing down.The one in wakefield has a good stock, may try that tomorrow.
Littledan:
we got ours from the LR show
AbyssDJ:
screwdriver... hammer... :roll: that was our solution when changing a wheel bearing in a carpark!
Eeyore:
A hub-nut box spanner can be had from any of the LR suppliers for between 5 -10 squid. It's a bit of a specialist part so doesn't often appear outside 'the scene'.
A 52mm socket can be had (in a 1/2" drive, too), but I've found the box spanner to be more useful, mainly because sockets themselves are often too short. I have seen deep 52mm sockets, but the price was horrendous!
Cheers
8)
Eeyore
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version