Vehicle & Technical > Discovery

HUB TOOL

<< < (4/4)

Bush Tucker Man:
Martin, you can borrow my 52mm hub/'box-spanner' if you want to?

I can drop it off Friday afternoon, after about 16:00-ish

PM me, or leave message on this thread if you want to borrow it. Okay?

muddymart:
Richard, thanks for the offer, i let the guy at the garage do the diff change today as well as all the gaskets and oil, plus the oil in the gearbox and transfer box and front diff,

so we shall see it its more easy on the ears  :lol:

Sharpshooter:
You shouldnt have to do up bearings till the spanner collapses and you take your knuckles off? Ive got the paddocks one, and ive been using it commercially for years. Screwdriverr and hammer work just as well.

Bearings should be done up reasonably tight,then back off one flat.

No loss of knuckles should be needed.

Range Rover Blues:
That's right, back off one flat/60 degrees or 90 degrees if you want to be able to feel the backlash.

Not a big fan of hammer and screwdriver though, in the wrong hands it burrs the nuts.

Navigation

[0] Message Index

[*] Previous page