Vehicle & Technical > Range Rover

ABS light

<< < (2/4) > >>

Range Rover Blues:

--- Quote from: "buster uk" ---my abs and traction control light comes on when i go over 60mph but once its turned off and restarted it goes.
Its bugging the hell out of me  :cry:
--- End quote ---
Perform a blink test, the ECU will have logged the fault even if it clears during the next diagnostic cylcle ie when you turn the ignition off then on again.

It's proably a bearing coming loose, it happens when you put big tyres on :wink:

buster uk:

--- Quote from: "Range Rover Blues" ---
--- Quote from: "buster uk" ---my abs and traction control light comes on when i go over 60mph but once its turned off and restarted it goes.
Its bugging the hell out of me  :cry:
--- End quote ---
Perform a blink test, the ECU will have logged the fault even if it clears during the next diagnostic cylcle ie when you turn the ignition off then on again.

It's proably a bearing coming loose, it happens when you put big tyres on :wink:
--- End quote ---


cheers,i'll give it a go.I've done the play on the back,need to check the fronts.
One thing i have noticed is vibration at speed,i wonder if some balencing weights have come away from the wheels with the off roading.
I'll do the blink test to see whats in there.

Range Rover Blues:
Or mud in your tyres.

That vibrating could be the casue of the ABS light too.

buster uk:
hmm,never thought of that as there always clogged up with mud  :wink:
I'll look at it when it gets a bit warmer outside.

thanks for the help  8)

DAVE39V8:
My traction control and abs lights stay on too since I tried to change the rear hub(just to find it didn't fit properly).
For some reason the outer bearing of the "new" hub is further towards the wheel so could only get one bearing lock nut on instead of the two.
So had to strip it all down again putting my disc/abs ring etc on my old hub just to find now my lights won't go out.. :evil:

Any ideas  :?:  :?:

Navigation

[0] Message Index

[#] Next page

[*] Previous page