Vehicle & Technical > Suzuki

What lift Kit Do You Recommend

<< < (2/2)

Popeye:

--- Quote from: "deepndirtyvitara" ---Nearly the same Gary, but I had a rush of blood to the head and bought 16''!!!!!!  I think i'll go for the bits 4 vits 2" kit.

Are they easy to fit and what did you guys use to extend the gear/transfer lever?
--- End quote ---



Differant numbers but same size take a look - http://www.tyresave.co.uk/tyresize.html plug both sets of numbers in and see the results  :wink:

markyb:
3 inch kits usually suffer with diff cases as it rotas it forward to drop it down to keep the cv angles right,

i did 2 cases in 4 years on a calmini lift 2nd one i changed the rear mount on the diff and the only thing i saw was a few stress highline cracks appear after a year,

i used to run 33.12.50 and a ARB in it. i think alot was down to me having a jap vitara,  US kits tended to fit better

when the kit was first on i put 31s and 32mm spacers on with very very slight rubbering at the front,

jeepmadmike:
i built a 6" lift for my vit, cut the front of the chassis off and moved it down by 4" and fitted +2 springs dropped the diff by 40mm. On the rear i moved the spring mounts down fitted +2 springs and modified the A frame took about 20 hours and and made it a beast in the ruff.

Navigation

[0] Message Index

[*] Previous page