WOW

[barmiebrumie]

Yesterday spent 9 hours fitting,

Cranked rear radius arms,
Rear shock dropers,
Rear re-location cones,
Rear heavyduty +2 springs,
Rear brake pads.

Think that was a good days graft all on my own, had to take the grinder to the one arm  :twisted: ,

Took it for a test drive after & where I would normall only do 40-45mph on a sweeping bend on a road close to home took it round at 60mph & there was no swaying or driving from the back axle  :D ,

Didn't realise just how nuch the axle can move when bushes ect get worn out, just need to get the rest of the bits for the front now & do the same again, need a TD5 front prop & flange ( Ive been told) if anyone has a spare, alraed got the QT radius arms

[wing nut]

well done john  :lol:  :lol:  

[Littledan]

nice one john :)

[barnhill4x4]

I need to do that to mine, Any volunteers?!

[Lyndsey731]

John

I did the same to mine a few months ago, hard work but amazing results. With mine I also had to remove the winch bumper and wiring, rear bumper, tank guard and +2 shocks from my old 200tdi. I bought new +2 progessive springs from Scorpion, -2 turrets, -2 rear shock mounts, dislocation cones extended brake lines and QT front and rear arms. The rear diff on the 300 was leaking and as I had new discs on the 200 we swapped the axles over aswell. This was done with the help of a good mate and his workshop. There are a few photos in my gallery which show the days events. A couple worth noting are the rear axle, nearside with -2 shock mount and offside with standard, you can clearly see the extra droop, and for everyone that asks about tyre sizes you can see how a 235/85 16 grizzly claw sits in a standard arch with a 2" lift, not a lot of room left hence the extended arches.

Gav