Vehicle & Technical > Defender

Snorkle

<< < (2/3) > >>

Snooky:
Cheers for the advice, now how does the curent cover come of the wing, I'm guessing I need to undo something from inside, which I guess means moving the heater pioes etc?

muck_truck:
there is also one of them drain things where you cant see it!

The plastic thing that is behind the wing (Where you bolt the 1st part of snorkle to) is in 2 parts to go round the bend to mate upto the air pipe.  On the bottom edge of this there is another rubber drain thingy exactly same as on the air box.  

There is no way of getting to it without either removing inner wing or unbolting the outter wing and bending it out giving enough room to yank it out.

to get the outter cover off just prise it off with a screwdriver, it only clips on.

Snooky:
Snorkle fitted, rocket science it ain't, but out of all those with them fitted, how many have blocked the 2nd drain mud truck has mentioned?
And is this the same for all models, mine is a 2.5TD?

Xtremeteam:
just to chear u up i dyno'ed my 90 tonight to set thefueling up,with the snorkel connected & discconected i found that i was loosing 1-2 bhp with it connected

joker777:

--- Quote from: "Redlinemike" ---just to chear u up i dyno'ed my 90 tonight to set thefueling up,with the snorkel connected & discconected i found that i was loosing 1-2 bhp with it connected
--- End quote ---


dont think i will loose any sleep over that,  i can gain that performance back by leaving the missus at home ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page