Vehicle & Technical > Discovery

Discovery 1 cat1 alarm fob

(1/2) > >>

Microteck:
can any one help. i have two singel button fobs. i have a reprogram sequance to set them but when i have to press the buttons on the fobs and the turn the ignistion on and off again thay downt do any think. iv repkaced the batterys in both fobs. has any one got the reprograming requance that thay can let me have to compare. :(

Jake:
This might help
http://members.mud-club.com/library/?articleid=24
 :D

Cyberprog:
That sequence only seems to work with the single button alarm system on 200tdi's and some 300's.
2-button alarms need to go on a testbook t4 machine to have fobs reprogrammed.

Microteck:
Many thanks to your replys. i have tryed that seq and it all work apart from the fobs. the horn sounds and the red light on the dash stays on. after when pressing the fob the door locks dont work nor dos the alarm arm. if i use the key in the door every think works regarding the alarm :?

Range Rover Blues:
But if you use the key the alarm isn't fully armed.  You did have an assistant help you, I cannot run round to the bonnet fast enough, I even tried a broom handle that I plulled away with a peice of string.

Navigation

[0] Message Index

[#] Next page