Vehicle & Technical > Discovery

Discovery 1 cat1 alarm fob

<< < (2/2)

Porny:
Cyberprog is correct....

What year is your Discovery???

If it's 1996 onwards then it will have a 10AS unit behind the dashboard that controls the alarm... this very different to  200 and early 300Tdi's.

The 2 fob alarm modules (that only work with a 10AS unit) can not be reprogrammed using the mentioned sequence and need to be done with diagnostic equipment.... and thus a visit to a local dealer/specialist.

However.... whereabouts are you in Yorkshire??

I'm at my girfriends parents over Christmas near Brigg (junc 4 of the M180)... if you fancied a drive I'll have my Rovacom Diagnostic Kit with me and could programme the fobs for you - for less than a dealer/specialist.

You can tell if your Disco has the later type alarm by either...
The fact it's 1996 or newer or if you look on the lower part of the dash (in front of you left knee if sat in the drivers seat) then you should see a rectangular plug (OBD11 Plug).


Ian

Microteck:
Hi
yes i did have some one with me to push the bonnet swith seeing as in about 6ft and my leg got cramp trying to do it on my own ( my wife said i looked like a balarena mmmmm) any way the dicovery is a mark 1 200tdi on a k plate. had another go at it and this time the alarm horn started going on and off. red led stayed on but nothink would work regarding the fobs. as to where i am im in a place called kirkbymoorside. just of the a170 Helmsley throw to scarbrough. :roll:

DD:
hi microteck, i'm havin exactly the same problem wi my 300tdi. :cry:  did anyone manage to find a solution? cheers. DD

Navigation

[0] Message Index

[*] Previous page