Vehicle & Technical > Defender
110 Front Diff Casing
Porny:
Or you could buy a second hand axle case... I might know of one going spare :wink:
Ian
LAND-ROVER-PIMP:
:shock: NITEMARE! Can't I cut the old pan off then flush the dust out with some miracle fluid? There must be something!! How much for the casing Ian if it comes to it? I was going to cut the old pan off and clean out any dust debris then flush the diff a few times with fresh oil after the new pan was fitted!
Mitch
mmgemini:
--- Quote from: "LAND-ROVER-PIMP" ---:shock: NITEMARE! Can't I cut the old pan off then flush the dust out with some miracle fluid? There must be something!! How much for the casing Ian if it comes to it? I was going to cut the old pan off and clean out any dust debris then flush the diff a few times with fresh oil after the new pan was fitted!
Mitch
--- End quote ---
No take the diff out.You'll have enough trouble getting the stuff out of the caseing as it is.
LAND-ROVER-PIMP:
Does this mean the front axle has to be removed??
Xtremeteam:
no just take the diff out,have to strip both hubs to pull the shafts out,then remove the prop & pull the diff out,then your ready to start cutting the pan off
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version