Suspention lift pic AND mesurements

[Evilgoat]

ANyone got a pic of a vit with the basic 2" suspention lift on it, trying to decide wether to do it or not and I suspect I already have a lift wnaywa as I have 4 almost brand new springs and she seems to sit a lot higher than most.

Diff to ground clearance from a standard would be usefult too.

[tdci bob]

im tryin to get a 2" lift kit from bits4vits for mine. if i get one by the weekend i'll take pics for you.

[zacspeed]

This what you're looking for?

[Evilgoat]

Sorta

I need the diff height off a standard vit so I can see if anything has been done to her already. Dont wanna chew my driveshafts up and I'm sure muddyJLX doesnt have an endless supply :) son only minimal lift. HJow much was that kit?

[zacspeed]

The strut spacer cost £35 from Dave Jones at Bits For Vits (eBay) & Jeff (my work-mate) fabricated the rest of the stuff. You can get the whole lot from Dave if you view his eBay shop.
 :)

[generation-x]

rich wot colour are ur springs if blue and thick then its got a kit on if skinny and black then u got nuffin

simon

[Evilgoat]

Quite heavy looking, black with the lower portion of the spring sprayed green. Everything else under there has a layer of crud on it even when we got it, but the springs were imaculate.

And its front diff to ground I was after, not rear, just realised thats a pointless measurement :)

[generation-x]

ill have a measure on bob tomoz for ya rich your have to work out the difference as he is wearing 235x70x16 muddys

simon

[Evilgoat]

I have a feeling tahts what the AT2s are. Or close. I guess wheel rim to ground would help if I'm being lazy :)

[generation-x]

hi rich bobs diff at it lowest point is 27cms off the ground

simon

[Evilgoat]

will get measure out tomorrow, but I have a feeling she's higher than that by some amount. Axel stand (10T Clarke one) will go under there on its lowest setting.