Vehicle & Technical > Discovery

Wandering Disco

<< < (2/3) > >>

Range Rover Blues:
Then fit polybushes, I don't care what anybody says, they cost £4 and once you have them in they can be changed every year in about half an hour (if you stop for a slurp of your tea).

strangerover:
Speaking of Panhard rods...

is there any benefit in a adjustable one for a disco with an extra 2" ?

and does anyone do a rose jointed one ?

Richie_EB4:

--- Quote from: "strangerover" ---Speaking of Panhard rods...

is there any benefit in a adjustable one for a disco with an extra 2" ?

and does anyone do a rose jointed one ?
--- End quote ---


The adjustable one allows you to realign the axle with the chassis as it gets pulled off to one side when you lift them...........and scorpion do a rose jointed one.

hobbit:

--- Quote from: "Range Rover Blues" ---Then fit polybushes, I don't care what anybody says, they cost £4 and once you have them in they can be changed every year in about half an hour (if you stop for a slurp of your tea).
--- End quote ---


I know, I do, the other two sets were rubber, polys lasting a lot longer :wink:

andyb:

--- Quote ---The adjustable one allows you to realign the axle with the chassis as it gets pulled off to one side when you lift them...........and scorpion do a rose jointed one.
--- End quote ---

No real need. 2 inch lift will cause about a 2mm offset. All the rubber bushes will have move wideways movement than that! As for LR build tolerances!! :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page