Topic: Removing safari snorkel (Read 8154 times)

drmike · « **on:** August 27, 2006, 16:04:36 »

I've had it with the ruddy snorkel. All it does it get thumped by trees and stuff. I'm never going deep enough to get a wet bum so I plan to remove it.

As it was fitted to the 90 when I bought it I have no instructions and I'm not sure what to expect when removing it or what kind of hole I'll be left with.

Can anyone advise please?

Mike

the loon · « **Reply #1 on:** August 27, 2006, 16:28:17 »

If its the same as the hole you have to cut on the disco for a safari you'll need a new wing as its not small.
Also depending on the way its attached to the wing (again if same as the disco) thye easiest way to take it off is to remove wheel, remove plastic wheel arch liner and then you can access the bolts - I would say for the hassle leave it in place

defenderdan · « **Reply #2 on:** August 27, 2006, 16:57:26 »

You don't have to cut a big hole when fitting, on a defender its already there. You will need to get hold of a grille to put in the big hole in the wing but you will be left with three small bolt holes. As for inside the wing there is a moulded pipe that you will need that connects to the flexy pipe from the air box. You might be best putting an ad in the wanted section as there must be loads of people who have taken these parts off when they fitted their safari snorkels. :)

drmike · « **Reply #3 on:** August 27, 2006, 18:09:23 »

Dan that's very helpful and I'll put something in wanted for as you say many people must have just what I need.

Mike

SteveG · « **Reply #4 on:** August 27, 2006, 19:35:36 »

Hi Mike

You'll have no problem selling the safari snorkel. If you still want a snorkel go for a southdown one. You have not of the tree hitting issues.

Cheers

Steve

bullfrog · « **Reply #5 on:** August 27, 2006, 19:51:33 »

I might buy it if it will fit with my rollcage ?

defenderdan · « **Reply #6 on:** August 27, 2006, 19:56:15 »

It wont be a straight forward fit presuming your cage is of the usual design. They can be made to fit, somebody makes a plate to move the mount slighly but i don't know who it is, also it makes them look a bit odd.

Litch · « **Reply #7 on:** August 27, 2006, 20:18:49 »

The air-intake assy & pipe which fixes to the wing is very cheap from a dealer so I wouldn't bother looking for a S/H set.

drmike · « **Reply #8 on:** August 28, 2006, 07:46:54 »

When you say cheap any idea of what it costs?

Mike

Litch · « **Reply #9 on:** August 28, 2006, 10:16:30 »

Don't know how much excatly but I have seen a break down of costs (it was from when I had a 300TDi fitted to my 90) and nothing was more than a few Ã‚Â£.
Ring someone like DLS or Paddocks and ask them, they will give you the part No's at the same time.

Skywalker · « **Reply #10 on:** August 28, 2006, 22:33:38 »

Quote from: "defenderdan"

It wont be a straight forward fit presuming your cage is of the usual design. They can be made to fit, somebody makes a plate to move the mount slighly but i don't know who it is, also it makes them look a bit odd.

You probably mean one of these

Main website is here

I bought a kit, it's still in the garage, I found it easier to make the bits 'miself :roll:

Dave

Thrasher · « **Reply #11 on:** August 28, 2006, 22:35:58 »

I have a safari on my rollcage :-)

No problems - check my galleries....

*edit*

Oh and some more shots on http://community.webshots.com/user/landroverdiscoveryv8i

bullfrog · « **Reply #12 on:** August 28, 2006, 22:41:05 »

Difficult to see but I get the idea.
I have a RRC mantec one that I was gonna mod and fit upside down but I quite like the look of the safari ones.
I never used to but am coming round to the idea.
What's it worth ??

kevinf · « **Reply #13 on:** August 29, 2006, 08:45:25 »

u didnt mention what engine td5/tdi300 or tdi200

if its a td5 would be interested in buying it dependant on cost

cheers kevin

drmike · « **Reply #14 on:** August 29, 2006, 19:56:16 »

200 TDI so you're not interested!

I think it'll come off once I source the bits to tidy up.

I'm thinking what I might do is try and make something that would help when going a little deeper. I don't want a wet bum but I don't mind a bit of depth.

Mike

bullfrog · « **Reply #15 on:** August 29, 2006, 20:10:10 »

OOOER :shock:

How much then once its removed :?: :?: :?: :?: :)

drmike · « **Reply #16 on:** August 29, 2006, 20:54:00 »

I'll probably put it on eBay - I don't even know what they are new though.

Mike

bullfrog · « **Reply #17 on:** August 31, 2006, 00:22:15 »

I will have alook at their site.
Anyone else ????
I am def interested prior to you listing it though !

defenderdan · « **Reply #18 on:** August 31, 2006, 09:46:36 »

Quote from: "drmike"

I'll probably put it on eBay - I don't even know what they are new though.

Mike

Currently Ã‚Â£138 at paddocks
If it helps i sold my 300tdi safari snorkle for Ã‚Â£80 6 months ago

drmike · « **Reply #19 on:** August 31, 2006, 10:08:25 »

Thanks for the price info. Out of interest why did you sell yours?

Mike

defenderdan · « **Reply #20 on:** August 31, 2006, 10:24:53 »

I sold the vehicle and i thought it would be easier to sell without all the suggestions of off road abuse bolted to it. A safari snorkle wouldn't have lasted 5 minutes on my current 90 though so i modified rebel 4x4 snorkles so that nothing sticks out past the roll cage :lol:

drmike · « **Reply #21 on:** September 09, 2006, 15:58:17 »

Hi just managed to get the snorkel off, boy was the sealant reluctant to let go - now listed on eBay 150031787282

Mike

News:

AuthorTopic: Removing safari snorkel (Read 8154 times)

the loon

defenderdan

defenderdan

defenderdan

defenderdan