Vehicle & Technical > Range Rover

Waterproofing or moving ECU

<< < (2/3) > >>

banditman:
couldn't find it...but now I have !!

blacknight:
Thanks for the replies.

It's given me quite a few things to think about, especialy the snorkel.

Pete5844 as was:
Blacknight if you work it all out please tell me how cos mine stops if someone take's a p*ss in the feild.Cheers Pete

Garth:
A good set of leads,  Clean the dizzy cap and coil before fitting with a VERY light smear of vaseline  

Smear of grease around the joining face of the dizzy

See avatar.

A snorkel will be my next purchase though as I do not have shares in the company that makes the air filters

blacknight:
Thanks for all the replies.

ECU has now been moved to the top of the dash.

Easy job to do. Took out drivers seat to gain better access to the ECU. Unscrewed the ECU and pulled back the carpet to reveal the ECU cable. Then unplugged and unclipped the cable which was the re-routed under the dash and out throught the little panel in the top of the dash. Stuck ECU to top of dash with double sided sticky tape.

Sprayed plug leads and dizzy cap with motorcycle chain wax but have not yet found enough water to test these waterproofing measures yet.

Navigation

[0] Message Index

[#] Next page

[*] Previous page