AuthorTopic: need wiring HELP  (Read 508 times)

0 Members and 1 Guest are viewing this topic.

Offline DEF110

  • Posts: 38
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
need wiring HELP
« on: May 30, 2006, 23:16:20 »
I am converting from a 3.9 (original was 3.5) to a 300tdi with auto box and a new galvanized chassis. I have installed a 300tdi chassis loom and a 300tdi bulkhead loom as to not have to splice alot of wires together. In the bulkhead loom the rear fog light plug the one that plugs into the two wires that come from the switch on the steering column is not their. It dose not look like it was cut out or removed as the loom still has all the factory tape rap. Not sure what year the loom is from. The fuse block runs two rows horizontal rather than two rows vertical if that helps identify a year. All so need to know what relays go in the loom I think there is 3 or 4 plug in by the fuse block and 2 or 3 behind the clocks. Just not sure what relays go in the relay plugs, I'm sure one is for turn signal, one for hazard flasher, the rest ???
So any and all help would be a big help.
All so any pictures of the fuse block and the wires behind the clocks to show the relays and fog light wires.

Offline doctorvaltar

  • Posts: 117
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
need wiring HELP
« Reply #1 on: May 31, 2006, 00:53:41 »
Sorry I can't help you with the wiring but what are you doing with the 3.9?
James

90 V8 that is costing me a fortune!!

Offline DEF110

  • Posts: 38
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
need wiring HELP
« Reply #2 on: May 31, 2006, 06:58:47 »
sorry i have sold the 3.9

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal