AuthorTopic: Electric Aerial  (Read 1439 times)

0 Members and 1 Guest are viewing this topic.

missroadrage

  • Guest
Electric Aerial
« on: May 20, 2006, 01:44:02 »
I caught a low branch on my way home from work yesterday & bent the aerial on my Pajero, I got home and gently straightened it and it will go down to the last section & goes up ok so I do not need to replace it but I was wondering how easy it is to replace. Can you just replace the telescopic bit or do you have to buy a complete aerial :?:

Thanks

Offline chris9119

  • Posts: 1400
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • The New Big Boy, Gert...
    • Lordswood, Kent
  • Referrals: 0
Electric Aerial
« Reply #1 on: May 20, 2006, 07:57:04 »
You have to replace the complete unit as the mechanism that makes it go up and down is connected to the tip and drive motor.

Chris
Chris
Si hoc adfixum in obice legere potes, et liberaliter educatus et nimis propinquus ades

http://members.mud-club.com/profiles/chris9119/gallery

Mud-Clubbers do it on channel 30






missroadrage

  • Guest
Electric Aerial
« Reply #2 on: May 20, 2006, 09:06:44 »
Does anyone know where I can get an aerial unit & approx how much. Also is it easy to change or am I better off putting up with it as it is??

Offline denviks

  • Posts: 1219
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Electric Aerial
« Reply #3 on: May 20, 2006, 09:58:24 »
hi...you can replace just the antenna part  :wink:  i did it with my shogun when i had it...simple job aswell. if i remember correctly the antenna part was about 18 pounds from mitsi......i think ( was along time ago now  :lol: ).

to replace.

make sure stereo is turned off and antenna is as far down as possible
undo the chrome nut on the bottom of antenna .....where is meets the car
now turn radio on so antenna extends. it will keep coming out

now get new one and push into hole.. turn the radio off and wait for it to pull the new atenna in. do up the nut again.

one thing to watch for when removing it is when it comes out watch the plastic strip inside. see which way it is facing. when putting the new one in try and make sure it goes in the same way  :wink:

i hope this helps abit. if not give me a shout
cheers
dennis
more moves than a dad in a disco!!!!!!!!!!


im always @ www.plcuk.co.uk

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Electric Aerial
« Reply #4 on: May 20, 2006, 10:41:23 »
Or fit a rubber duck type aerial, not so prone for ripping out :wink:

Another option is a pillar mounted one
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

missroadrage

  • Guest
Electric Aerial
« Reply #5 on: May 20, 2006, 17:34:02 »
Thanks for all the help & advice :)

We had been to equicar & bought a second hand replacement before got the advice from denviks but never mind it is sorted now & cost me £30 & gave Skutter something to do for a while.

Thanks again   :wink:

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal