Topic: 90 doors on series (Read 2118 times)

bezzabsa · « **on:** March 14, 2006, 15:01:18 »

just wondering how hard it is to change to door striker plate over to the anti burst jobbie? do i need to drill anymore holes or does it just slot in where the series ones went?
cheers

dew1911 · « **Reply #1 on:** March 14, 2006, 15:49:36 »

Well this months LRW shows you how to fit Series doors to a 90, so I presume they work in reverse. didn't have to drill anything either.

Bob696 · « **Reply #2 on:** March 14, 2006, 16:43:33 »

got series doors on my 90

Xtremeteam · « **Reply #3 on:** March 14, 2006, 16:48:08 »

fitting series doors on my 90

Neil Jones · « **Reply #4 on:** March 14, 2006, 17:03:58 »

Got 90 doors on my series. Cant remember fully, but we did have to do some drilling.

bezzabsa · « **Reply #5 on:** March 14, 2006, 17:22:34 »

cheers for the quick replies, should have worded it a little better.. i am swapping the 90 doors over to my series and series to the 90..90 has the anti burst locks, series has the old door latch type..

Xtremeteam · « **Reply #6 on:** March 14, 2006, 17:41:26 »

in which case u ned to drill 2 new holes on the series i think to make them fit as they are ush button off the 90

hobbit · « **Reply #7 on:** March 14, 2006, 17:53:56 »

Got defender tops on series bottoms

:?

bezzabsa · « **Reply #8 on:** March 14, 2006, 18:01:45 »

trying to get a less drafty series...not i said LESS drafty rather than draft free..plus i have 90 doors sat on my 90...which is sat next to my series..soooooooo....
:lol:

Reaper · « **Reply #9 on:** March 14, 2006, 19:58:34 »

I got 90 doors on my series, you have to drill a couple of holes but nothing major! makes a big difference to the draught and cold problem.
It was great fun when I first insured it, the woman on the phone did'nt know what to say when I told her it had "90 doors" :lol:

bezzabsa · « **Reply #10 on:** March 14, 2006, 20:14:12 »

dont suppose anyone has pics of what has to be drilled???
and those doors look a damn sight better than the ones im fitting, then again going to be matt black so not a problem ;)

bezzabsa · « **Reply #11 on:** March 15, 2006, 19:33:16 »

had a quick once over today, looks as though its just a case of measuring up the door striker plate and re drilling in the correct place, think the series ones are slightly lower.....

bezzabsa · « **Reply #12 on:** March 17, 2006, 15:01:42 »

well, if its dry tomorrow, and my backs up to it i may well 'dryfit' one of the doors and see what problems i come across..may well have a good look at the screen as well see if something can be fabricated to move it on to the series..

bezzabsa · « **Reply #13 on:** March 31, 2006, 18:24:35 »

well started doing it.. heres link to thread
http://forums.mud-club.com/viewtopic.php?p=210666#210666
(started new thred.. then remembered this one!!)

News:

AuthorTopic: 90 doors on series (Read 2118 times)

bezzabsa

90 doors on series

dew1911

90 doors on series

Bob696

90 doors on series

Xtremeteam

90 doors on series

Neil Jones

90 doors on series

bezzabsa

90 doors on series

Xtremeteam

90 doors on series

hobbit

90 doors on series

bezzabsa

90 doors on series

Reaper

90 doors on series

bezzabsa

90 doors on series

bezzabsa

90 doors on series

bezzabsa

90 doors on series

bezzabsa

90 doors on series