Topic: New Toy - Roll Cage Completed (Read 4732 times)

chris9119 · « **on:** February 26, 2006, 15:47:29 »

earlier post gone missing, so here it is again......... [-o<

Roll cage finished on BT-R (bob tailed rangie).
Now on to the engine.

Chris

landraver · « **Reply #1 on:** February 26, 2006, 16:06:30 »

Nice job Chris :D

Looks crackin' 8)

Jeff

Littledan · « **Reply #2 on:** February 26, 2006, 16:26:52 »

awesome job mate looks wicked :D

dan :D

blackbob · « **Reply #3 on:** February 26, 2006, 18:37:00 »

:D nice one i like the rock slider side step

thumbs · « **Reply #4 on:** February 26, 2006, 18:59:52 »

that looks really good mate

hope you are strong to get spare wheel on, im assuming thats the mount on the rear cage :D

p4203 · « **Reply #5 on:** February 26, 2006, 19:14:30 »

nice cage can i ask please what you used for the rear arch extensions they look cool

chris9119 · « **Reply #6 on:** February 26, 2006, 21:41:05 »

Quote from: "p4203"

nice cage can i ask please what you used for the rear arch extensions they look cool

There defender ones from eblag @ Ã‚Â£59.00 + pp

Slight seconds (surface damage), but makes no odds as there going to be painted.

Chris

heres the wheel mounted picture

p4203 · « **Reply #7 on:** February 27, 2006, 07:17:02 »

hi chris
were they easy to modify poss close up picture as mine needs something like that cheers

Greybeard · « **Reply #8 on:** February 27, 2006, 10:50:32 »

What a superb job. What tubing did you use and what type of pipe bender.

Steve

chris9119 · « **Reply #9 on:** February 27, 2006, 12:53:49 »

Quote from: "p4203"

hi chris
were they easy to modify poss close up picture as mine needs something like that cheers

real pig. better to get the Devon ones that fix to the surface.

Will post some pictures later.

Chris

chris9119 · « **Reply #10 on:** February 27, 2006, 12:55:48 »

Quote from: "B@D@SSÃ‚Â©Ã‚Â®"

What a superb job. What tubing did you use and what type of pipe bender.

Steve

tube was 45mm cold drawn seamless bent on a hydraulic bender. all joints were welded by a coded welder. some of the butt welds are invisable....

Chris

pedro · « **Reply #11 on:** March 02, 2006, 21:46:32 »

That is one awsome looking cage.
Im currently building a bobbed rangie.
Im a bit unsure about the cill through the front wing.
Is the any chance you could give me advise on where the cage is mounted internally.
Cheers.

chris9119 · « **Reply #12 on:** March 02, 2006, 22:53:00 »

Quote from: "pedro"

That is one awsome looking cage.
Im currently building a bobbed rangie.
Im a bit unsure about the cill through the front wing.
Is the any chance you could give me advise on where the cage is mounted internally.
Cheers.

Pedro, technically its an external cage, not internal.

The front/rear hoops are connected to the chasis. The front one comes down in front of the front door post (see picture), the rear one connects to the chasis just next to the body out rigger. This one comes through the floor (rear footwell).

If you need any more info, just ask.

Chris

PoPrivit · « **Reply #13 on:** March 03, 2006, 11:06:41 »

Hi chap looks good. Im thinking of doing one this spring any chance of a pic of the roof and rear cab as this is the part im not sure about.

Cheers rich

barmiebrumie · « **Reply #14 on:** March 03, 2006, 12:16:40 »

AAAARRRRHHH, its just not fare every one is getting there trucks in order & i'm stuck rebuilding a house for my duaghter,

Looking nice there Cris, did you buy it readfy made or did you make it ??,

John.

pedro · « **Reply #15 on:** March 03, 2006, 23:54:37 »

thanks for the reply
Where abouts is it connected to the chassis on the front.
Also how is it connected

Cheers
Pedro

chris9119 · « **Reply #16 on:** March 04, 2006, 13:16:38 »

Quote from: "rich_h1"

Hi chap looks good. Im thinking of doing one this spring any chance of a pic of the roof and rear cab as this is the part im not sure about.

Cheers rich

Rich

The first three pictures show roof, etc. What else are you looking for :?:

Chris

chris9119 · « **Reply #17 on:** March 04, 2006, 13:17:20 »

Quote from: "barmiebrumie"

AAAARRRRHHH, its just not fare every one is getting there trucks in order & i'm stuck rebuilding a house for my duaghter,

Looking nice there Cris, did you buy it readfy made or did you make it ??,

John.

John

DIY :idea:

Chris

chris9119 · « **Reply #18 on:** March 04, 2006, 13:19:06 »

Quote from: "pedro"

thanks for the reply
Where abouts is it connected to the chassis on the front.
Also how is it connected

Cheers
Pedro

Pedro

As per the rear, runs along side the body/chasis mount and is welded to a plate that is welded to the chasis.

Will try and post some close ups.....

Chris

bullfrog · « **Reply #19 on:** March 07, 2006, 01:34:26 »

Very nice mate. 8) First cab back that looks nice. Very inventive. Cant wait to see it finnished !

Dave · « **Reply #20 on:** March 07, 2006, 11:35:43 »

Chris that look brilliant very nice job. If i now you that rollcage will get tested soon enough as you would try anything in your disco so this will just be mad.

chris9119 · « **Reply #21 on:** March 07, 2006, 22:53:45 »

Quote from: "Dave"

Chris that look brilliant very nice job. If i now you that rollcage will get tested soon enough as you would try anything in your disco so this will just be mad.

You will be more than welcome to sit in one of the seats.......

Chris

Dave · « **Reply #22 on:** March 09, 2006, 06:41:41 »

Sorry Chris im busy that day :shock: :oops: what ever day that maybe. My gut would not take it. Can not wait to see it in the flesh though 8) .

News:

AuthorTopic: New Toy - Roll Cage Completed (Read 4732 times)