Topic: 235x85x16 Tyre pressures UPDATE! (Read 5112 times)

500bhp · « **on:** December 11, 2005, 14:36:39 »

Hi........I am changing my tyres to 235x85x16 Maxima's http://www.algarpneus.pt/fedima/fedima.htm
Can anyone recommend the pressures to run them at for road use.

Xtremeteam · « **Reply #1 on:** December 11, 2005, 14:44:42 »

they look like firestone SAT's,got them on my 90

i run them at 26 for daily driving & when playing go down to about 10psi

Bulli · « **Reply #2 on:** December 11, 2005, 14:47:55 »

MIke sounds spot on . I normally dont go as low as 10 but depends on conditions.

500bhp · « **Reply #3 on:** December 11, 2005, 14:50:10 »

Is the 26 psi front and rear ?

Xtremeteam · « **Reply #4 on:** December 11, 2005, 15:49:08 »

yep,26 all round

be warned though,they are ****** scary in the wet,they make there own mind up when they want to grip on wet tarmac

muddyweb · « **Reply #5 on:** December 11, 2005, 16:44:34 »

Before you part with your money, make sure they carry the appropriate 'E' mark and speed rating for road use... you could find yourself without insurance if they don't :shock:

500bhp · « **Reply #6 on:** December 11, 2005, 23:09:50 »

They do have the correct approvel for road use....but I must admit 26 psi seems low for the weight of a Discovery....but if you guys are sure I will go with it.

Bulli · « **Reply #7 on:** December 11, 2005, 23:19:16 »

I run mine generally around 26, occasionally up to 30 if im going on a very long run but they dont feel as sure footed somehow. Yeah Tims right check they are legal for your disco....uninsured isnt somewhere you want to go.

500bhp · « **Reply #8 on:** December 12, 2005, 17:22:49 »

In the end I got 7.50x16, should I still run them at 26psi for road use ?

thermidorthelobster · « **Reply #9 on:** December 12, 2005, 17:40:55 »

Wow, I normally run at about 35psi at the front and 32psi at the back. I found I was getting a lot of wear at 25psi.

The 101 tyres are now at 45psi, which is probably overkill, but it's bloody heavy.

MuddyMachine · « **Reply #10 on:** December 12, 2005, 17:56:17 »

I run my 238/85/16s at 30psi all round. That semms to work best for me.

500bhp · « **Reply #11 on:** December 12, 2005, 18:08:47 »

So should the pressures be the same for 7.50 x 16 as used with 235x85x16............Does anyone on here run on 7.50 x 16 Sat's

Xtremeteam · « **Reply #12 on:** December 12, 2005, 18:32:21 »

yes,i run 750 sat's,got mine at 30 just now to try & its even worse in the wet,will prob put it back to 26 tommorow

Matt_H · « **Reply #13 on:** December 12, 2005, 21:10:23 »

I run mine at what the manual said... 30 front, 40 rear.. or it may be 28 front 38 rear.

no problems gripping anything in any weather, on 235/85/16 grizzly claws :-)

Matt

loyalduke · « **Reply #14 on:** December 18, 2005, 20:57:29 »

I am putting a 2" lift on my Disco. Will 235/85/16ATs fit without further modification or are they just too big :? Just been offered some at a low price

John

LCW11 · « **Reply #15 on:** December 18, 2005, 21:02:02 »

Quote from: "loyalduke"

I am putting a 2" lift on my Disco. Will 235/85/16ATs fit without further modification or are they just too big :? Just been offered some at a low price

John

i hope so, just about to fit some with a 1'' lift :oops: BLIMEY

LEE

Skywalker · « **Reply #16 on:** December 18, 2005, 21:37:50 »

This chart gives some recommendations for tyre size / fittment etc to a standard Disco I, might be useful guys

Tyre Sizes

Dave

MuddyMachine · « **Reply #17 on:** December 18, 2005, 21:48:01 »

ive got 235/85/16s on mine with 1" spaces, I had to trim the rear arches and the front valence

Matt_H · « **Reply #18 on:** December 18, 2005, 22:02:10 »

it all depends on what tyres - I used grizzly claws and they would catch on the plastic sill covers..

I therefore gor a set of sill bars made a bit shorter than the plastic ones (which are now for sale Ã‚Â£125!)

I also cut the wheel arches back by at least one inch all round, then used some knock on edging to make it MOT friendly.

I also added a set of exted bump stops from paddock spares. (mine maybe for sale)

Oh then there are extended brake lines you may want too (also maybe for sale)

HTH
Matthew

DISCO-CHRIS · « **Reply #19 on:** December 19, 2005, 00:13:19 »

Any ideas for 35-12.50-15,s?
just fitted them on mine(hooray)and are used mainly on the road. :lol:

News:

AuthorTopic: 235x85x16 Tyre pressures UPDATE! (Read 5112 times)