Vehicle & Technical > Discovery

wheel bearing woe`s

<< < (2/3) > >>

landroverkeith:
ty guys :) got em for £21 each from mm4x4.com very helpfull chaps so ive ordered 3, a hub spanner, and a set of rear brake pads (should take my wheels off more often  :oops: ) lol

i forgot about the grease though  :wink:  no probs ill nip over to shelltune on sat morn those guys are like gods theve allllllways got the bits lol

Range Rover Blues:
If memory serves, the unbranded ones at Paddocks are about £4 a bearing but you want to fit the Timken ones at about £7 a bearing.  Including new oil seals it should cost less than £30 inc postage plus a dolop of grease.  Don't forget a new drive member gasket too.

landroverkeith:
#-o ok ive got stuck with my bearing now drivers rear is tottaly shot cooked solid to the stub  ](*,)  we bent my hub spanner trying to get the kin thing off i spent £30  :shock:  on a hub socket all the way over in milton keynes we broke 2 breaker bars tried heating it up and using a air gun still no good so now im totally lost ....  :(

if i cut the nut off sumhow i presume i can buy replacement parts but would it be a landrover parts department job ?

and help would be very nice many thanks keith

seph234:
its not something like a reverse thread is it, i dont know coz ive only done the fronts but just something to check.  joe

landroverkeith:
no m8 we did the left rear also the same day that came off luvlay was getting a little loose so we changed it

Navigation

[0] Message Index

[#] Next page

[*] Previous page