Vehicle & Technical > Discovery

Next step?

<< < (3/3)

GaryPatt:
Thanks for al lthe info Budgie (printed it for future ref) so without change to gearing or cut-out arches? what size? please? is reccomended please?

Gary

Thrasher:
Factory 235/70 .. but some people fit (ISTR) 245/75 (but you have to nip a bit out)

Budgie:
As Neil says, without cutting anything then 245/75R16 or you could just get away with 31/10.5R15's.

The amount of trimming on the rear arch for the likes of 265/75R16's is on this forum somewhere if you want to go down that route, your not taking that much off.  :wink:

Bulli:
Even with 2 inch lift you would be best off doing the camel cut to the rear quarter as they will probably catch...if you give some stick over the lumps. You need to alter your gearing as budgie says if you go any bigger than 31, unless you like 40mph up hills that is!

Navigation

[0] Message Index

[*] Previous page