AuthorTopic: Oil Bath vs. K & N Filter  (Read 1260 times)

0 Members and 1 Guest are viewing this topic.

Offline Spyderman

  • Posts: 146
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« on: October 28, 2006, 13:37:12 »
I have a 1981 Series III Diesel. What are the pros & cons of replacing the oil bath air filter with a K 7 N. I have been told elsewhere that the engine will be smokier with the K & N. The engine smokes like a train already, don't want to make it worse as MOT coming up. What do you think?[/b]
Who needs brakes???

1981 Series III 88"
2.5 N/A Diesel
9.00x16 Michelin XL
Fairey PTO Winch
1 ton Shackles
Blue/Cream with a delicate shade of mud.

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #1 on: October 28, 2006, 14:12:27 »
Try running with the oil bath out and see how much less smokey it will be one day, that'll give you some idea
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Spyderman

  • Posts: 146
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #2 on: October 28, 2006, 16:11:36 »
Won't that risk sucking dirt into the engine?
Who needs brakes???

1981 Series III 88"
2.5 N/A Diesel
9.00x16 Michelin XL
Fairey PTO Winch
1 ton Shackles
Blue/Cream with a delicate shade of mud.

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #3 on: October 28, 2006, 16:25:41 »
Only briefly on a tarmac road, long term it would, you could warm her up, then take the pipe off the intake, and see how it looks in the tail pipe when running down the road
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Spyderman

  • Posts: 146
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #4 on: October 28, 2006, 17:53:24 »
Ok, will try that thanks, Have you used a K&N filter?
Who needs brakes???

1981 Series III 88"
2.5 N/A Diesel
9.00x16 Michelin XL
Fairey PTO Winch
1 ton Shackles
Blue/Cream with a delicate shade of mud.

Offline tomarse

  • Posts: 260
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #5 on: October 28, 2006, 18:18:20 »
ive got a k&n on my 2.5 n/a D 2Aand it works fine and doesnt smoke.

it means i have less stuff getting in the way in my engine bay ;)

the landy definately goes better on the rare occasions that i clean and re-oil the k&n, so it probably gives more go than the normal filter.

Offline Spyderman

  • Posts: 146
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #6 on: October 28, 2006, 18:22:15 »
The main reason I was thinking of doing it was to free up some space in the engine bay and hopefully a bit more BHP but obviously not at the expense of not passing the dreaded MOT
Who needs brakes???

1981 Series III 88"
2.5 N/A Diesel
9.00x16 Michelin XL
Fairey PTO Winch
1 ton Shackles
Blue/Cream with a delicate shade of mud.

Offline tinca

  • Posts: 58
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #7 on: October 28, 2006, 20:01:01 »
surely it would run leaner with the k&n on it, more air flow and all that, so i would imagine it will run with less smoke, not more

Offline Robbo

  • Posts: 252
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #8 on: October 29, 2006, 00:30:37 »
don't forget to warm up the engine loads and loads and loads and loads and loads and loads...getting the picture yet? loads and loads and loads before the MOT - it helps with the emissions if the engine is really hot when tested.

Cheers

Robbo
Daisy SWB series 3 station wagon, 1975 and pretty in mud

Eat a live toad the first thing in the morning and nothing worse will happen to you the rest of the day

Offline Spyderman

  • Posts: 146
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil Bath vs. K & N Filter
« Reply #9 on: October 29, 2006, 09:05:41 »
That'll be LOADS then. Thanks. I've heard that if you run the tank right down and put a small amount of 50/50 mix of Diesel/Parafin with a bottle of Cetane booster just before you take it to the MOT that does the trick. Might give that a practice go first.
Who needs brakes???

1981 Series III 88"
2.5 N/A Diesel
9.00x16 Michelin XL
Fairey PTO Winch
1 ton Shackles
Blue/Cream with a delicate shade of mud.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal