AuthorTopic: big bang from my back axle  (Read 2107 times)

0 Members and 1 Guest are viewing this topic.

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« on: December 05, 2005, 13:54:11 »
so there i was today, pulling out of sainsburys car park, when i hear a loud bang and suddenly loose all drive.
dang, i think, there goes another half shaft

so i get back to my work car park after putting it in 4x4, and pull out both shafts, and both are still in one peice, but the oil in the axle is a nasty rust brown colour
the prop shaft still turns, so it appears that my diff has gone the way of the fabled norwegian blue.
oh well

anyone know where i can get a new diff from?
i've posted in the wanted section

Ian
series 3 - 200tdi
Discovery V8

Offline Miniman

  • Posts: 1638
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #1 on: December 05, 2005, 15:56:36 »
Think your self lucky. I have just bought a 109 with a 3.3L perkins engine in I think I will be needing new diffs and halfshafts more than I need fuel...
WATER DRAWS LAND ROVERS LIKE IRON FILINGS TO A MAGNET
************************************
110 300tdi Everyday car.
90 200TDI Toy
Series3 90 look alike Project.
Skipton North Yorkshire



D E F R A. Destroying English Farming and Rural Areas.

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #2 on: December 05, 2005, 16:01:48 »
if you remember, i had a thread a while back about
noises coming from my back axle
series 3 - 200tdi
Discovery V8

Offline Miniman

  • Posts: 1638
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #3 on: December 05, 2005, 16:11:45 »
Oh dear well at least you know what it is now......

Its all in the fun of owning a series landy...

I was on a 4x4 day and went for a big hill, Just as I was about to get my front wheels to the top of the hill it stalled.....and stuck.
That was it no gears no movment at all. Could not even free wheel back down the hill it was solid. I had to get another 4x4 to tug me forward to get it on top of the hill but then it was fine. So I continued to play 30 mins later it happened again.....That was it for me.....Head went...and the gob...

It turned out to be when I pulled the box in bit that 3rd gear had lost a tooth and it was picking it up and sticking between gears thus locking the box.
WATER DRAWS LAND ROVERS LIKE IRON FILINGS TO A MAGNET
************************************
110 300tdi Everyday car.
90 200TDI Toy
Series3 90 look alike Project.
Skipton North Yorkshire



D E F R A. Destroying English Farming and Rural Areas.

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #4 on: December 05, 2005, 16:56:28 »
i'm wondering if its safe to drive with the rear diff as it is, just using the front axle, or will it lock in the way your gearbox did?
the only way to know is to pull the diff out i suppose
series 3 - 200tdi
Discovery V8

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #5 on: December 05, 2005, 17:01:12 »
the only problem may be that there is bits floating round in there, they could cause a lockup, its not a big job to change the diff, and should be easy enough to get one
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #6 on: December 05, 2005, 17:29:53 »
paddocks have series 3 diffs for 70 plus vat, so if all else fails i can go to them.
confusingly, they also have series 2 diffs, at a lower price. i thought they were the same?
series 3 - 200tdi
Discovery V8

Offline Miniman

  • Posts: 1638
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #7 on: December 05, 2005, 18:30:29 »
I have fit early 90 diffs in my 2.25 D landy and its alot better for road use. 85mph on a good day on flat. I can drive 70mph without sc*ewing the engine to death....this may be the time to go get 2 second hand units and save yourself fuel and engine bills.... Fuel economy is brill now...
WATER DRAWS LAND ROVERS LIKE IRON FILINGS TO A MAGNET
************************************
110 300tdi Everyday car.
90 200TDI Toy
Series3 90 look alike Project.
Skipton North Yorkshire



D E F R A. Destroying English Farming and Rural Areas.

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #8 on: December 05, 2005, 18:31:48 »
but whats the acceleration like?
mine is bad enough as it is, and your engine has been modded for more power
series 3 - 200tdi
Discovery V8

Offline Miniman

  • Posts: 1638
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #9 on: December 05, 2005, 19:53:09 »
All I have done at the moment to my engine is re adjust the injector pump. It was slow at first as the pump was out buy 2mm. It accelerates to 70mph in about 20-25seconds its good. The home made exhaust is a defo as the original exhaust is very restrictive. I have done away with the oil bath filter and fit a renault 21 paper filter which helps alot.
WATER DRAWS LAND ROVERS LIKE IRON FILINGS TO A MAGNET
************************************
110 300tdi Everyday car.
90 200TDI Toy
Series3 90 look alike Project.
Skipton North Yorkshire



D E F R A. Destroying English Farming and Rural Areas.

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #10 on: December 07, 2005, 17:46:02 »
stripped it down tonight, and it appears that i have managed to shear off all the bolts that hold the crown wheel to the diff centre :shock:
how i managed that, i'll never know. but it least it might be repairable.
series 3 - 200tdi
Discovery V8

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
big bang from my back axle
« Reply #11 on: December 12, 2005, 12:39:05 »
new diff is now in and working, thanks Chris!
much less play in the back axle now, and theres only a slight thunk as i take up drive.
its leaking a bit from around the diff/axle joint, but i've tightened the bolts up more, so it might be okay now.

Ian
series 3 - 200tdi
Discovery V8

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal