Mud-club
Vehicle & Technical => Range Rover => Topic started by: rokcrawlin on June 13, 2005, 18:07:35
-
I have a 1993 classic with manual gearbox and 3.9 as I come up to junctions the engine just stops I understand there is a solenoid that lifts the revs up to stop it stalling anybody know where it is ? tickover is set at 850 rpm :oops:
-
No :lol: :lol: I love it. It's what owning a Land Rover is all about :lol: :lol:
-
Returning to address the technical nature of this post.
Lift the bonnet. The solenoid will under there somewhere :lol: :lol:
Is this why your e-mail address always begins fixv8 :lol: :lol:
-
:lol: :lol: Sorry had to chuckle at that....
But seriously i wish i could help you mate, hopefully someone will come along with a suggestion or even a cure. Got me baffled EFIs are usually ok assumeing it is an EFI. :?
-
Idle bypass valve, stepper motor, back of plenum chamber, b*****d to get at.
-
Idle bypass valve, stepper motor, back of plenum chamber, b*****d to get at.
yep i agree,although had it once on 1 that started to play up just gave it a dunt with a shackle pin & it worked lol
-
cheers guys squirted it with some contact cleaner works now
-
:(contented):
-
Returning to address the technical nature of this post.
Lift the bonnet. The solenoid will under there somewhere :lol: :lol:
Is this why your e-mail address always begins fixv8 :lol: :lol:
hey Guy if it was your 110 I could easily spot it through the er um no there is not a tactile way to do this..............rust molested bulkhead :shock: :shock: :shock: :shock: :shock: :twisted: :twisted:
-
:oops: I know not everything as I am only a mere mortal not an orf road guru god like figure, in a 110 with a get you into everwhere card :lol: :lol: :lol: :lol: :lol:
-
Returning to address the technical nature of this post.
Lift the bonnet. The solenoid will under there somewhere :lol: :lol:
Splutter...