Mud-club
Vehicle & Technical => Range Rover => Topic started by: stevieboy on May 15, 2005, 22:34:21
-
Hi I've fitted a pair of fans to my 3.9 1990 rangy does anyone know were I can get a temperature control box from , thanks
-
A bit of info here :
http://forums.mud-club.com/viewtopic.php?t=7897
-
Doesn't Wizardbuilt bloke sell them? otherwise I got mine from Merlin Motorsport.
I have 2 fans so each has it's own relay, switched by the thermostat switch. I then did a bit of clever wiring so that they com eon all the time but without the ignition they run at half the speed, quieter when they come on just after you've got in at midnight and less current drain.
-
got one from wizardbilt great service ,only thing is no wiring diagram anyone know were C , 1 and 2 go to thanks
-
I got a thermostatic relay from RS components. 15 quid it was. Worked well although you had to be ingenious to fit it.
-
Hi
The C terminal is common or 12+
the 1 terminal is marked N/O normally open and the 2 is marked N/C for normaly closed contact.
Connect the fan wire to the 2(N/O) contact, and your 12v supply to the C contact.
Sorry about the instructions, i took it for granted that people would know how to connect them. I'll include a drawing from now on.
Regards
wizard
-
All done, thanks everyone works a treat :D