Mud-club
Vehicle & Technical => Discovery => Topic started by: racedriver on November 26, 2010, 19:35:48
-
So...as title really. Engine seems to have 1 cam follower tapping away when engine is running.
Question is, does anyone now if clean oil will help or of any other ideas that don't involve engine strip down.
Thanks.
-
Can't hurt to try but they aren't hydraulic lifters, they are however adjustable if you remove the rocker cover.
typical causes of noisey tappets include:
Bent pushrods
Weak or broken valve springs
bent valve stems or stickey valves
excessive wear in cam followers or cam lobes (moreso on hydraulic lifters)
bent or broken rocker shaft
also on the TDi the bronze cam followers can also break
does it run smoothley, is it using too much fuel? if not then chances are the valves are closing properly, start by checking the clearnece in any case.
-
or these they can wear through completly . ive replaced a couple http://cgi.ebay.co.uk/Land-Rover-Defender-Valve-Stem-Caps-LJC100270-/290477324049?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a1cc3711 alan