Mud-club

Vehicle & Technical => Discovery => Topic started by: Andy. on April 22, 2005, 14:39:16

Title: Changing Oil Cooler pipes
Post by: Andy. on April 22, 2005, 14:39:16

As it says, how easy/difficult is it  :?:

Cheers.

Oh it's on a 200 tdi Discovery if it makes any difference  :?:

Title: Changing Oil Cooler pipes
Post by: Xtremeteam on April 22, 2005, 19:19:33

fairly easy just fiddly & can be messy,oh btw the connections into the rad can either be verry tight & pain to undo cos you can only go a flat at a time.

Title: Changing Oil Cooler pipes
Post by: daveh on April 23, 2005, 18:22:23

Use plenty of newspaper on the ground as you can't really avoid some oil spill. Make sure when you take the old pipes out that you also get out the o-rings they can tend to come off the old pipes and stay in the fittings. Other than that and the fact you will need 24mm spanner, NO PROBLEMS.