Mud-club

Vehicle & Technical => Discovery => Topic started by: discosfa on April 08, 2010, 19:03:17

Title: disco chassis
Post by: discosfa on April 08, 2010, 19:03:17

hi  :)
having found that my chassis has a few more holes than it should  :( i have 2 questions 1, is there any wiring in the chassis (in case when i come to weld it)
2,if i was to get another chassis how hard is it to change ie can the body be lifted off whole ( i have access to a telehandler)
forgot to say its a m reg 300 tdi
               Roy

Title: Re: disco chassis
Post by: Disco-Ron on April 08, 2010, 20:52:09

Roy, 'if' you decide you might want another chassis..... i have a 300tdi chassis, the front half of which is in very good condition... the rear has surface rust, i bought it with the intention of having it blasted and galved..... then changing it over on mine, however, i have just bought a 90, so the disco is going.... so is the chassis, i have the V5 for it, in my name, sorn........
£50 and you can take it away!
ps, its in dorset....LOL!!

Title: Re: disco chassis
Post by: stretchy on April 11, 2010, 19:16:18

in my experience the older the disco the better the chassis.

Title: Re: disco chassis
Post by: Range Rover Blues on April 11, 2010, 20:12:30

Funny that, I'm thinking the same.


Any RRC or Disco chassis will do but before 1991/2 they had a steel fuel tank which mounts differently.