Mud-club

Vehicle & Technical => Discovery => Topic started by: strapping young lad on April 15, 2005, 20:37:31

Title: audio cable
Post by: strapping young lad on April 15, 2005, 20:37:31

help

just been to halfords and they told me the bad news

the company who installed my head unit in 2002 hard wired the alpine connector onto the loom and not put an ISO connector on it

solutions

2 really

1) buy another alpine to fill the gap
2) cut the wires and make up the connector myself


great  :evil:

Title: audio cable
Post by: ChrisW on April 15, 2005, 20:43:50

don't they do an alpine to iso adaptor lead instead?

Title: audio cable
Post by: ChrisW on April 15, 2005, 20:55:30

or just get an 'any other' to iso adaptor and butcher that into the alpine lead?

Title: audio cable
Post by: strapping young lad on April 15, 2005, 22:19:48

yeh but i dont know the colour coding of the cabl though

any hints?

Title: audio cable
Post by: Andy. on April 15, 2005, 22:31:06

Just an idea have you tried Maplins, there good on auto leads.

Title: audio cable
Post by: Xtremeteam on April 15, 2005, 22:46:40

If you look CLOSELY on the wiring from the alpine connection to the join into the loom,it SHOULD tell you what each wire is for,,

on the sony lead that im looking at just now it goes:(on Power plug 4 wires )
black is earth
red is power
yellow is switched power
blue is antenna power up

(on speaker plug 8 wires)
purple rear right +
purple/black rear right -
green-rear left +
green/black rear left -
white front left +
white/black front left -
grey front right+
grey/black front right-



blue/grey square trace for telephone mute
blue/white trace for amp on
think thats it,hope it helps