Mud-club

Vehicle & Technical => Range Rover => Topic started by: gingernutsv8 on January 14, 2010, 14:53:43

Title: rear axle
Post by: gingernutsv8 on January 14, 2010, 14:53:43

I have just got a 24 spline rear axle for my rangie mine has 12 spline on front and rear if i put the compleat rear on will i need to change the front to match

Title: Re: rear axle
Post by: doda456 on January 14, 2010, 15:40:02

It won't be a problem, cos it's not the number of splines that matter but the ratio of the diff.  All rangerover diffs are 4.7 ratio as standard I believe

Title: Re: rear axle
Post by: tack43 on January 14, 2010, 16:49:13

Quote from: doda456 on January 14, 2010, 15:40:02

It won't be a problem, cos it's not the number of splines that matter but the ratio of the diff.  All rangerover diffs are 4.7 ratio as standard I believe

3.54:1 for RRC (4.7 are series vehicles)

Rich

Title: Re: rear axle
Post by: gingernutsv8 on January 14, 2010, 17:03:25

does the same apply if it's off a disco

Title: Re: rear axle
Post by: tack43 on January 14, 2010, 17:35:25

Quote from: gingernutsv8 on January 14, 2010, 17:03:25

does the same apply if it's off a disco

You can use RRC, Disco 1, 90/110, Defender (upto about 1994, I think) except salisbury axles. All have same final drive ratio of 3.54:1 and 10 spline diffs. I think they changed to 24 spline diffs on change to 300 TDi in 1994.

Hope this helps

Rich

Title: Re: rear axle
Post by: bogie on January 14, 2010, 21:15:27

24 came in 1993 L reg but as its a landy your gona get exceptions?