Mud-club

Vehicle & Technical => Defender => Topic started by: Yoshi on November 13, 2009, 18:16:29

Title: Bolts N Nuts!
Post by: Yoshi on November 13, 2009, 18:16:29

Does anyone know what size bolts and nuts are needed for fitting a tow bar to a 110?

Its the 2 that go up into the cross member, and the 2 that go through the struts and through the chassis?

Cheers

Dan

Title: Re: Bolts N Nuts!
Post by: Range Rover Blues on November 15, 2009, 02:41:48

Through the eyelets under the chassi either M8 or M10 i think.  I know the RRC comes fitted with M8 but an M10 will fit.

Can't help with the rear crossmemebr though, it's different.

Title: Re: Bolts N Nuts!
Post by: tack43 on November 15, 2009, 14:21:14

M10's for both but ensure you use High Tensile bolts.

Rich