Mud-club
Vehicle & Technical => Suzuki => Topic started by: dodgyjeep on March 01, 2009, 18:43:27
-
Hi chaps,
just moved the sj on to the drive, put it into 2H, then the stick went a bit stiff and suddenly moved, now cannot select anything?
any ideas gratefully recieved
mark
-
hi mark
when you say you selected 2hi does that mean you have used it on tarmac in 4x4 mode?
simon
-
on gravel in 4L, then thought would try other gearts as spends its life in 4L, then bug*ered!!
-
That will be a worn shifter sheet, I have had the same thing a couple of times.
Take the gator off
compress the little spring clip that holds on the rubber boot
slide the rubber boot up the stick
then where the stick goes push the out side ring down and turn it and it should pop out
then you can take the stick out
look down the hole and you will see your shift sheet witch is a round ring and the two shaft align the shafts up so the cut outs are level use a big screw driver
you can pop the shifter sheet out and you will proberly need a replacement as its worn.,
or for a better explanation look here
http://zukioffroad.com/Tech_Library/tcase_shifter_bushing.htm (http://zukioffroad.com/Tech_Library/tcase_shifter_bushing.htm)
Some time you can get away with cleaning it up and greasing it but I think there are only a few quid so you may aswell buy a new one.
-
can you reccomend a good postal supplieer of said item?
-
I got mine from Main dealers here is the Suzuki part number.
29541-80051
I can have a word with my local dealer tomorrow if you want and I can send it to you if you want for the price of of the item + postage.