Mud-club

Vehicle & Technical => Defender => Topic started by: benbenukuk on February 11, 2009, 15:40:02

Title: TDI Timing Case Breather
Post by: benbenukuk on February 11, 2009, 15:40:02

I have just got a TDI Timing Case Breather that goes on the bottom of the case where the plug would normally be can I leave this breather on all the time? and can I get one for the bell housing? Ben

Title: Re: TDI Timing Case Breather
Post by: fezzy192 on February 11, 2009, 17:41:13

ben i wouldnt use a breather from the bottom as oil will block it up if any comes out from the crankcase

i have got a wading plug in mine all times and i have made my breather in the inspection plate in the timing case

Title: Re: TDI Timing Case Breather
Post by: zulublue on February 11, 2009, 18:19:33

As Kev say's above put it in the timing inspection cover.

Title: Re: TDI Timing Case Breather
Post by: L90OOK on February 11, 2009, 22:24:51

Don't leave a wading plug in the bell housing or the timing case...they act as drains as well as breathers.  put a breathers in elsewhere but never leave the wading bungs in

Title: Re: TDI Timing Case Breather
Post by: zulublue on February 11, 2009, 22:58:02

I leave mine in and check them about once per month or if I have been in deep water within a day or two.