Mud-club

Vehicle & Technical => Discovery => Topic started by: lurch_917 on November 20, 2008, 09:26:38

Title: 300tdi rad plugs
Post by: lurch_917 on November 20, 2008, 09:26:38

high i remember sometime ago a post saying you can swap the crap plastic ones for some plumbing ends is this right and what size threads are they

Title: Re: 300tdi rad plugs
Post by: stageonesimmo on November 20, 2008, 09:49:42

1 inch BSP, (well, definately BSP, not sure of diameter...) if my memory is right - got my brass caps from B&Q for about a quid..............

Title: Re: 300tdi rad plugs
Post by: lurch_917 on November 20, 2008, 10:06:03

 cheers chap will have a look there

Title: Re: 300tdi rad plugs
Post by: Disco_Stu on November 20, 2008, 13:52:26

IIRC:

Axle, and G&T box breathers = 1/8 bsp
Timing cover and bell housing wading plugs are 1/4 bsp
Rad and stat plugs 1/2 inch bsp

Think thats right.

They sell em for a couple of quid on ebay.