Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: stevepage3 on November 09, 2008, 13:41:53

Title: Series 3 Tub Removal
Post by: stevepage3 on November 09, 2008, 13:41:53

Hi

I have just started to strip down my series 3 so that I can have a good look at the chassis. Can anyone tell me, will I need to remove the diesel tank to get the tub off.

Also and this is a big ask, would anyone with a diesel series be able to take a picture of the diesel pump / injector as it looks like mine has been bodged at some time and I am not sure what it should look like where the throttle cable and engine stop cable attach.

Many Thanks

Steve

Title: Re: Series 3 Tub Removal
Post by: Chris Putt on November 10, 2008, 01:50:20

From memory (was about 3 years ago...) I dont think it did....But I could well be wrong, Im gunna have a hunt about for some pics and see.......

Title: Re: Series 3 Tub Removal
Post by: baron von ledwidge on November 10, 2008, 01:55:31

im pretty sure you just have to femove the fill lines and breather line for the tank, but you dont have to take the tank out

Title: Re: Series 3 Tub Removal
Post by: stevepage3 on November 10, 2008, 09:42:48

Thanks Guys for the response

I seems that there are 2 bolts that go through a bracket on the chasssis and come out behind the fuel tank.

Steve