Mud-club

Vehicle & Technical => Defender => Topic started by: T30CDB on November 02, 2008, 12:55:03

Title: Wipac spot lights
Post by: T30CDB on November 02, 2008, 12:55:03

Could somebody please explain how you change the bulb in one of these ? or do i have to disconnect it and remove it from the a bar . Any advice appreciated  :)

Title: Re: Wipac spot lights
Post by: richo on November 02, 2008, 13:01:00

Hammer anyone?

Title: Re: Wipac spot lights
Post by: GROWLERV8 on November 02, 2008, 15:50:19

I think if I remember correctly you remove the screws from the outer ring remove the ring and pull out the lens
The bulb is held in with a spring clip
Should be enough cable in the light so you can change the bulb without removing the unit from your bar
Hope this helps
Rich

Title: Re: Wipac spot lights
Post by: T30CDB on November 03, 2008, 00:06:48

Cheers will give it a go in the day light  :)

Title: Re: Wipac spot lights
Post by: tack43 on November 03, 2008, 21:13:18

DON'T take the screws all the way they hold spring plates which clamp to the edgesof the bowl.