Mud-club

Vehicle & Technical => Discovery => Topic started by: wrecker on July 25, 2008, 22:13:15

Title: disco 200tdi spring probs
Post by: wrecker on July 25, 2008, 22:13:15

hay all,hope you can help,

my dad has put britpart heavy duty police spec springs on the rear,brand new the other day,

today hes put britpart front springs,standerd hight but this is where the prob starts,

the rear is a lot lower than the front,looks like a 1in lift,nothing in the boot,the front coils have a green mark on them,

does the police springs sit lower,or has he been giving the wrong springs,

at the front hes fitted monro gas shocks,normall at the rear,would that make the hight differ

any ideas whats wrong here,

Title: Re: disco 200tdi spring probs
Post by: clbarclay on July 25, 2008, 22:33:54

The dampers should not affect ride height.

Have you got the part numbers for the springs fitted?

Title: Re: disco 200tdi spring probs
Post by: wrecker on July 25, 2008, 22:38:38

right the part number that is on the box,paper work is

NRC2119,

hope this helps :oops:

Title: Re: disco 200tdi spring probs
Post by: AndyMacG on July 27, 2008, 18:55:42

have a look at this website it lists  all coil springs
http://members.shaw.ca/jbarge/springinfo.html#OEM (http://members.shaw.ca/jbarge/springinfo.html#OEM)


iirc   nrc2119 are range rover/disco rear