Mud-club
Vehicle & Technical => Discovery => Topic started by: mentalmoshio sophs V8i on July 09, 2008, 16:06:13
-
id used the ebay ones for 129 quid delivered
first job unbolt the 4 seat star bolts by sliding the seat right foward then back.
next measure the seat base left.
i made a 4 mm alloy plate for the top and used the orginal mounts to hold it in
then make the runner out for the new seats center and middle of the plate is a must.
drill the holes out .
then use m8 25mm bolts with locking thread to hold them in .
may be a good idea to test fit seat not bolted up first.
roughly 3 hours each one.
will add more pic in a few day.
-
are these fixed permanantly or can they be adjusted, i.e distance from steering wheel etc
-
they move the the orginal one as for steering wheel im gonna to be changing my one to ripspeed one . id say 6ft 3 would still drive it easily with a greater holding in the seat 4 sure