Mud-club

Vehicle & Technical => Discovery => Topic started by: bambamjj on May 24, 2008, 21:00:50

Title: Will this fit?
Post by: bambamjj on May 24, 2008, 21:00:50

Want a light bar for the bumper, this is for disco 2 i have a disco 1 300 Tdi

http://cgi.ebay.co.uk/LAND-ROVER-LIGHT-BAR-FOR-THE-DISCOVERY-2-LANDROVER_W0QQitemZ320138743874QQihZ011QQcategoryZ31348QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Title: Re: Will this fit?
Post by: Disco Matt on May 24, 2008, 21:02:27

You should be able to make it fit - I have no idea how it will look mind you, and you may need to do some trimming of the lump of plastic in the middle of the bumper (or just pull it off!)

Title: Re: Will this fit?
Post by: Jake on May 24, 2008, 21:22:40

Anything can be made to fit if you want it enough
From the look of it, you'd just drill a couple of holes to bolt it on then fix your lights to the tags
 :D

Title: Re: Will this fit?
Post by: mentalmoshio sophs V8i on May 24, 2008, 21:57:44

overpriced for me a simple wraparound bullbar front bit would do the same job all for a fiver. dont see the point in that simbar one  :roll:

Title: Re: Will this fit?
Post by: auf_wiedersehen_pet on May 27, 2008, 20:21:54

I would not buy one from Craddocks.

 :evil: Orders go missing.
 :evil: Orders arrive with parts missing.
 :evil: Staff are incredibly patronising.
 :evil: Communication is non existent.

Avoid them and buy it elsewhere.

Title: Re: Will this fit?
Post by: auf_wiedersehen_pet on May 28, 2008, 20:36:32

How about this?

Ebay link. (http://cgi.ebay.co.uk/Discovery-Series-2-Bumper-fitting-Light-Bar_W0QQitemZ170223286982QQihZ007QQcategoryZ31348QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)

Title: Re: Will this fit?
Post by: stageonesimmo on May 28, 2008, 20:59:52

Firm called lightforce or some such does 'em for 300Tdi discos.  Cant find the link just now, but if you google 'Light Bar', click the UK Sites only option and stick with it you'll find 'em........  They come in chrome or black.

Am still looking for the link................

Title: Re: Will this fit?
Post by: mentalmoshio sophs V8i on May 28, 2008, 21:35:17

martin motors 4x4 (mm4x4 ) worcester do one for the model uve got and its in stainless steel to