Mud-club
Vehicle & Technical => Discovery => Topic started by: ade666 on April 07, 2008, 18:45:58
-
hi all. just sorting out the rot on matlilda my off road disco and the near side inner wing is rather broken.by the time all rot is cut out there will be nothing but fresh air. my main stealer can sort me one for £173.00 and have stock every one else i've spoke too can;t get them for a while. are there any alternatives such as using a range rover classic one.
-
Hello chap, I'm breaking a disco with 2 good nick inner wings, ie I have already patched them, the disco is in bits at the mo, if you want both you're welcome to both sides say £30 collection only (sorry for the shameless plug there ;))
It may be easier than patching yours, based J28 M1
-
make your own! mine need doing and its probibly going to take an afternoon with an angle grinder and a mig
-
Mine is rotten -ish around the front body mounts, i've actually considered removing the front wings, and finding a 300 in a breaker with a good front end, then cutting the entire front end off, at the mid to rear point of the arches, then mating it onto mine... i'd gain 300 lights, and hopefully panels worth having... big job, but do-able i reckon!!
-
AFAIK they are very similar to RRC inner wings but getting hold of them at the moment is tricky.
I too have a Disco I'm breaking for parts if you want to pop over and have a look.
-
Hello RRB, the lower section of the wing on the disco and RRC are the same part, the differences are in the top section.
-
Check out this guy
http://www.yrm-metal-solutions.com/page3.htm
Just bought an inner wing and battery tray for my 300 - I can vouch for the quality, very pleased with mine.
-
thanks for the replies chaps. bought the wing repair panel from yrm metals and it is very good quality and my mate has patched it up nicely. RRB do you have the head light finisher and indicator for the passenger side for the disco your breaking and if so what you want for them