Mud-club

Vehicle & Technical => Freelander => Topic started by: Jas278 on April 03, 2008, 20:08:19

Title: Cruise......
Post by: Jas278 on April 03, 2008, 20:08:19

Anybody know if all the wiring is there ( as in the D2)  to fit cruise control to a Td4 ..........

Title: Re: Cruise......
Post by: Jas278 on April 17, 2008, 16:00:48

Anybody got cruise control on their Freelander..

Title: Re: Cruise......
Post by: Thrasher on April 17, 2008, 16:29:16

Had it on our V6 - not sure if the wiring exists, but I can't see why it wouldn't.

Title: Re: Cruise......
Post by: Jas278 on April 18, 2008, 19:47:51

Sounds like I need a word at the main Stealers....... :-k

Title: Re: Cruise......
Post by: V8MoneyPit on April 25, 2008, 18:02:34

We have it on our 2001 3dr TD4. There is a master switch on the dash and steering wheel controls.

Title: Re: Cruise......
Post by: thermidorthelobster on April 25, 2008, 18:10:47

Quote from: Jas278 on April 18, 2008, 19:47:51

Sounds like I need a word at the main Stealers....... :-k

I wouldn't bother - they won't know.  Most main dealers quote £450+ to fit cruise to a TD5 Disco, even though you can do it yourself in half an hour for about 50 quid.  They deny the wiring is there.

Title: Re: Cruise......
Post by: Jas278 on April 28, 2008, 20:37:15

Sounds like I need to have the airbag off , if the multi-plug is there then the other wiring will be there......cheers

Title: Re: Cruise......
Post by: Range Rover Blues on August 21, 2008, 17:45:16

I thought that about fitting fog lights to our Fiesta, as thw ring was there behind the bumper.  Troouble is the wirng loom for the dash is another part, and the wirng wasn't there form the switch to the fusebox, be careful and check it all.